Most people consume cannabis by smoking flower, but there’s a growing trend of people consuming cannabis concentrates, also known as “dabs.” Dabs are typically made using a process called extraction, which strips the plant material of its cannabinoids and terpenes. The end result is a highly potent product that can be consumed in many different ways.
One popular method of consuming dabs is by using a mason jar.
Mason jars are ideal for making dabs because they’re airtight and heat resistant. To make dabs in a mason jar, you’ll need to start with some type of cannabis concentrate.
You can purchase concentrates from a licensed dispensary or make your own at home using solvents like butane or CO2. Once you have your concentrate, place it into the mason jar and screw on the lid tightly.
HOW TO MAKE A MASON JAR DAB RIG 💯 CHEAP AND EASY🔥🔥
- 1) Start with a clean mason jar and lid
- If you are using a new jar, sterilize it by boiling for 10 minutes
- 2) Place your cannabis concentrate on the bottom of the mason jar
- A small amount is all you need, as dabs are very potent
- 3) Place the lid on the mason jar, screwing it on tight
- 4) Place the mason jar in a saucepan filled with water
- The water should come up about halfway up the side of the jar
- 5) Put the saucepan on the stove over medium heat and simmer until you see vapor coming out from under the lid of the mason jar
- This means that your dab is ready! 6) Remove the mason jar from the saucepan carefully, as it will be hot
- Take off the lid and inhale deeply to enjoy your homemade dab!
Credit: www.pinterest.com
How Do You Make Homemade Dab Wax?
Dabbing has become a popular way to consume cannabis concentrates, and many people are interested in making their own at home. The process of making dab wax is not difficult, but it does require some care and attention to detail. Here is a step-by-step guide to making your own dab wax:
1. Start with high quality cannabis trim or bud. This is the most important step, as the quality of your starting material will determine the quality of your finished product. Choose a strain that you know produces good results when made into concentrates.
2. Decide what type of concentrate you want to make. There are many different kinds of concentrates, each with its own unique properties. Some common types include shatter, budder, wax, and oil.
Each one has different benefits and drawbacks, so choose the one that best suits your needs.
3. Gather your supplies. In addition to high quality cannabis trim or bud, you will also need some sort of solvent (such as CO2 or butane), an extraction tube or column, filters, and something to collect the concentrate (such as parchment paper).
4. Begin the extraction process by adding your cannabis trim or bud to the extraction tube or column filled with solvent. Be sure to use enough solvent so that all of the material is fully submerged; this will help ensure a complete extraction.
How Do You Make a Dab Rig Out of a Mason Jar?
You can make a dab rig out of a Mason jar in just a few simple steps. First, you’ll need to find a jar that’s the right size for your needs. Then, you’ll need to drill a hole in the lid of the jar big enough to fit your nail or banger.
Next, you’ll want to add a diffuser to the bottom of the jar. This will help diffuse the heat and create smoother hits. Finally, you’ll need to add a mouthpiece to the top of the jar so you can inhale the vapor.
Mason jars are an inexpensive and easy way to get started with dabbing, and they can be easily customized to fit your needs.
What is the Easiest Way to Do Dabs?
There are a few ways to do dabs, but the easiest way is to use a dab rig. Dab rigs look similar to bongs, but they have a few key differences. For one, dab rigs have a nail instead of a bowl.
The nail is heated with a torch, and then the concentrated cannabis oil is placed on the hot nail. This vaporizes the oil, and it’s then inhaled through the dab rig.
Another easy way to do dabs is with an e-nail.
E-nails are electric nails that can be plugged into an outlet and regulated to whatever temperature you need. This makes them much safer than using a torch, and it also means you don’t have to constantly reheat the nail between hits. You can just set it and forget it!
If you want to get really fancy, there are also portable e-nails that run on batteries. These are great for taking hits on the go, without having to worry about carrying around a bulky rig or torch. Just make sure you have enough battery life to get through your session!
What Kind of Glass is Used for Dabs?
Dabbing is a popular way to consume cannabis concentrates, and the type of glass used for dabbing can play a big role in the overall experience. There are many different types of dab rigs on the market, but most will use either borosilicate or quartz glass.
Borosilicate glass is often used in scientific lab equipment because it can withstand high temperatures and is very durable.
This makes it a great choice for dab rigs, as it can handle the heat of the nail without breaking. Quartz glass is also resistant to high temperatures, but it has a lower thermal expansion rate than borosilicate glass. This means that quartz glasses are less likely to crack or break when exposed to sudden temperature changes.
Both borosilicate and quartz glasses have their own benefits and drawbacks, so it’s important to choose the right one for your needs. If you’re looking for a durable rig that can withstand high temperatures, borosilicate glass is a good option. However, if you’re worried about thermal shock causing your rig to break, quartz glass may be a better choice.
Conclusion
Dabs are a type of cannabis concentrate that is made by extracting the THC from the plant using a solvent like butane or CO2. The resulting product is a sticky, oily substance that can be used to dab on a smoking device or added to marijuana flower before smoking.
To make dabs in a mason jar, you will need:
-Cannabis trim or bud
-Butane (or another type of solvent)
-A mason jar with a lid
-A Pyrex dish or silicone mat
-A metal stirring rod
-A double boiler or crockpot
Instructions:
1. Fill your mason jar halfway with cannabis trim or bud. Be sure to pack it down tightly.
2. Pour butane into the jar until it covers the cannabis. 3. screw on the lid and shake vigorously for 2-3 minutes. 4. remove the lid and use the metal rod to stir the mixture for 1 minute 5 .
place your Pyrex dish or silicone mat on top of the double boiler or crockpot 6 . pour the contents of the mason jar onto the dish 7 . boil offthe butane 8 .
collectthe oil that remains 9 . enjoy your dabs!